Ocean Thermal Energy Conversion

The OTEC Plant

Principles of Geothermal Energy

Technological Aspects

Learning Outcomes

Lesson Summary

In this module, you will be introduced to the ocean thermal energy conversion or OTEC. This will include the principle behind OTEC operation, how it is done and what are the challenges associated with this technology. Then, you will study geothermal energy and the real possibilities of obtaining and using it effectively from the crust of the earth. Finally, you will learn about the environmental aspects involved in the extraction of geothermal energy.

Biomass: An Introduction

Biomass Agriculture

In this module, you will be introduced to the flapping process. This will include the variability of the boiling point according to atmospheric pressure. The concept of blinking and how it is done in the plant will also be discussed along with the different approaches by which biomass is currently used. Next, you will learn about biomass agriculture and how that is evaluated from an energy perspective and a food perspective.

Ocean and Geothermal Energy - Course assessment

Did you know we can harness green energy from the oceans, the Earth’s core and organic material from plants and animals?

Introduction to Ocean and Geothermal Energy

This course will introduce you to alternative energy sources using ocean and geothermal energy. Study the basic concepts and types of geothermal reservoirs and tidal energy. Learn how to capture these energy sources to take advantage of their benefits before studying biomass (organic animal and plant material) as an alternative source of energy.

This free material gives you an overview of ocean thermal energy conversion (OTEC), which is the energy that is obtained by harnessing the tides using an alternator. This system can be used to generate electricity, transforming tidal energy into electrical energy, which is considered safe and profitable. Learn about the challenges of taking advantage of this energy source and the by-products of OTEC. It is considered ‘clean’ because the primary power source is not depleted by its exploitation and it is not produced in a way that creates polluting by-products of any kind. The current challenges include the relationship between the amount of energy that can be obtained with current means, and the economic and environmental cost of installing the necessary devices has prevented a massive implementation of OTEC across the globe.
Next, you will study geothermal energy, another form of clean power, which can be extracted directly from the ground without the need for sophisticated technologies or purification through hot rock bodies or conduction and convection. Learn where geothermal energy is available and how there are different levels of heat depending on the prospecting that has been carried out. You will study the first stage of geological analysis, including the use of geological, geophysical and geochemical tools to locate anomalies that can reduce the search area. Grapple with the challenges that this form of energy presents, such as the availability of reservoirs and the fact that some geothermal sources do not have a high enough temperature to produce steam. Instead, these zones of lower temperature can provide energy for the air conditioning of buildings. We will also discuss the three levels of water forms based on location, namely supersaturated steam, superheated steam and hot water. The advantages of geothermal energy in contrast to OTEC are listed for you to analyze.
Finally, you will look into biomass energy and evaluate your position on whether it is clean energy or not. The process by which plants transform the radiant energy of the sun into chemical energy through photosynthesis is discussed, including how part of that energy is stored in the form of organic matter. Chemical energy from biomass can be recovered by burning it directly or turning it into fuel. The pros and cons of extracting energy from biomass are discussed: one advantage is that it could provide substitute energies for fossil fuels, thanks to liquid, gaseous or solid agrofuels. This, however, depends on not using more biomass than the net production of the exploited ecosystem. Considerations must be made on whether any other fuel consumption is incurred in the transformation processes and that the energy conversion is the most appropriate use compared to other possible uses, such as fertilizer and food. You will study the way in which biomass provides complementary fuel to fossil fuel, helping the growth of world consumption and its corresponding environmental impacts, especially in the transport sector. Understand the processes by which it is obtained and the classification of the 10 countries that most use this alternative form of energy. This course would be of benefit to those in the agricultural industry, those interested in supplementing their current fossil fuel energy consumption with a more durable alternative or students studying environmental science and renewable energy.

9 Best TensorFlow Courses for 2025

Harvard’s Intro to Python: Earn a Free Certificate

40+ Free Certificates from Wolfram U: Expand Your Computational Universe

University of Sheffield Ends 11-Year Partnership with FutureLearn

6 Best Courses to Become an Influencer in 2025

7 Best Low-Code/No-Code Development Courses for Beginners in 2025

7 Best Climate Change Courses for 2025: Exploring the Science

Exploring edX’s “Final” Tax Returns: Revenue Surges, Losses Mount, and Contributions Decline

CreativeLive is Live Again: CourseHorse Acquires Platform 15 Days Before Shutdown

Harvard and MIT’s $800 Million Mistake: The Triple Failure of 2U, edX, and Axim Collaborative

Udemy’s 2021: Half a Billion Revenue, B2B Revenue Soars, B2C Plateaus

Why Coursera Stock Dropped by 20%

900+ Open University Free Certificates

2025’s Online Education Shakeup Claims Another: Skillshare’s CEO Departs

Coursera Q1 2022: $120.4M Revenue, $38.3M in Losses, 16K Degree Students

Udacity’s 2021: Year in Review

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.